Nanostructured Top Contact as an Alternative to Transparent Conductive Oxides in Tandem Perovskite/c-Si Solar Cells

Impacto

Downloads

Downloads per month over past year

Elshorbagy, Mahmoud Hamdy Mohamed and Esteban Martínez, Óscar and Cuadrado Conde, Alexander and Alda, Javier (2022) Nanostructured Top Contact as an Alternative to Transparent Conductive Oxides in Tandem Perovskite/c-Si Solar Cells. Applied Sciences, 12 (4). 9 p.. ISSN 2076-3417

[thumbnail of applsci-12-01854.pdf]
Preview
PDF
Creative Commons Attribution.

2MB

Official URL: https://doi.org/10.3390/app12041854




Abstract

In the competition of solar cell efficiency, besides top-performance multijunction cells, tandem cells based on perovskites are also breaking efficiency records to enter into the 30% range. Their design takes advantage of the rapid development of perovskite cells, and the good sharing of the available spectrum between the perovskite, absorbing at short wavelengths, and the c-Si or similar lower band gap material, working at longer wavelengths. In this paper, we present a novel tandem solar cell that combines crystalline silicon (c-Si) and perovskites cells. We analyzed the device with computational electromagnetism based on the finite element method. Our design arranges the perovskite solar cell as a multilayer 1D grating, which is terminated with a gold thin film (top metallic contact). This multilayer nanostructure is placed on top of the c-Si cell and a thin protective dielectric layer of aluminum nitride covers the whole device. The short-circuit current of the perovskite cell is maximized by maintaining the current-matching conditions with the output from the c-Si cell. This optimization considers the geometrical parameters of the grating: period and thickness of the active layer of the perovskite cell. We compared the simulated short-circuit current of this device to the planar tandem solar cell with indium tin oxide (top contact). The comparison shows a slight increment, around 3%, of our device’s performance. Moreover, it has the potential capability to circumvent postprocessing procedures used with transparent contact oxides, which can reduce the device’s final efficiency. Furthermore, our proposed design can take advantage of photolithographic and nanoimprint techniques, enabling large-scale production at a relatively low cost.


Item Type:Article
Additional Information:

Received: 25 January 2022 / Revised: 7 February 2022 / Accepted: 9 February 2022 / Published: 11 February 2022

Uncontrolled Keywords:tandem perovskite/c-Si solar cell; nanostructured metallic top contact; optical modeling; computational electromagnetism
Subjects:Sciences > Physics > Electromagnetism
Sciences > Physics > Optics
Sciences > Physics > Particles
ID Code:74024
Deposited On:27 Jul 2022 12:22
Last Modified:03 Aug 2022 10:42

Origin of downloads

Repository Staff Only: item control page